CentoLight Scenic W504 User Manual

4x50w warm + pure white led par with 25 beam for indoor use
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

4x50W Warm + Pure White LED PAR with 25° beam for indoor use
PAR per uso interno con 4 LED da 50W Bianco Caldo + Puro e apertura a 25°
User Manual
Manuale Utente
Carefully read this manual and properly take care of it
Leggete questo manuale e conservatelo per future consultazioni
Scenic W504
Scenic W504
ENG
ITA

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for CentoLight Scenic W504

  • Page 1 Scenic W504 Scenic W504 4x50W Warm + Pure White LED PAR with 25° beam for indoor use PAR per uso interno con 4 LED da 50W Bianco Caldo + Puro e apertura a 25° User Manual Manuale Utente Carefully read this manual and properly take care of it...
  • Page 2 Dear customer, First of all thanks for purchasing a CENTOLIGHT® product. Our mission is to satisfy all possible needs of light designers and professionals of entertainment lighting, by offering a wide range of products based on the latest technologies. We hope you will be satisfied with this fixture and, if you want to collaborate, we are looking for a feedback from you about product operation and possible im- provements to be introduced in the next future.
  • Page 3: Table Of Contents

    able of onTenTs 1 - Before you Begin 1.1. What is included- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 1.2.
  • Page 4: Before You Begin

    Thank you for purchasing SCENIC W504. Enjoy your new equipment and make sure to read this manual carefully before operation! This user manual is made to provide both an overview of controls, as well as information on how to use them.
  • Page 5: Disclaimer

    1.4. Disclaimer The information and specifications contained in this User Manual are subject to change without notice. CENTOLIGHT assumes no responsibility or liability for any errors or omissions and reserves the right to revise or to create this manual at any time.
  • Page 6: Mounting And Rigging

    SCENIC W504 User Manual 3 - M ounTing and igging Pay attention to safety! Please respectively consider the EN 60598-2-17 and the national standard during the installation. Only authorized technicians can carry out the installation. 3.1. Rigging The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming demolition.
  • Page 7: Heat

    4 - i nTroduCTion Scenic W504 is a compact and lightweight LED Par designed for live events, club installations and all those indoor applications where white lights with different color temperature and narrow beam (25°) are required. The light source features 4x50W LEDs (2 Warm White @ 3200°K;...
  • Page 8: Product Dimensions And Overview

    SCENIC W504 User Manual Up to 109000 lux @ 1m Warm White (3200°K) and Pure White (5600°K) color mixing Flicker-free LED emission for broadcast applications DMX-512 control with RDM 25° beam angle with advanced dimmer system and strobo effects Intelligent fan speed and control Lightweight aluminum housing with all-directional ventilation system 4.2.
  • Page 9: Product Setup

    POWER 3) Power Input/Output Sockets Plug the power-cord included with Scenic W504 into an AC socket properly config- ured for this fixture. Please read “5.2. About Power Connection” on page 10 for details. This fixture is also equipped with an output power connector to be used as power mains source in case of cascade connection up to a maximum of 5 fix- tures.
  • Page 10: About Power Connection

    SCENIC W504 User Manual Power Input 100-240Vac - 50/60Hz 1st Unit 2nd Unit 3rd Unit 4th Unit 5th Unit 4) DMX Input/Output Sockets DMX Input is a 3-pin male XLR socket for connection to a DMX control device. DMX output is a3-pin female socket for sending the DMX control signal to other units.
  • Page 11: Dmx Terminator

    SCENIC W504 User Manual that provides for the easiest and most direct cabling. DMX Termonator DMX use of 3-Pin XLR Connectors INPUT OUTPUT 3-Pin XLR Unit 1 Unit 2 Last Unit Pin 1: GND Pin 2: DMX - Pin 3: DMX +...
  • Page 12: Menu Operation

    SCENIC W504 User Manual 5-Pins XLR (socket) 3-Pins XLR (plug) Pin 1: GND (Screen) Pin 1: GND (Screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C...
  • Page 13: Set Dmx Address

    001 - 505 DMX range to enable control of up to 85 products in the 6-channel control mode. Set the Scenic W504 starting address in the 001 - 511 DMX range to enable control of up to 256 products in the 2-channel control mode.
  • Page 14: Master/Slave Mode

    Fan noise @ 1m is 43dBA ca. 6.4. Master/Slave Mode In case you need to control more SCENIC W504 simultaneously (all fixtures operate exactly the same way) without the use of a DMX controller, you can use the Master/ Slave function.
  • Page 15: Specification

    * To contact CentoLight service, see “9 - Warranty And Service” on page 16 or visit www.centolight.com ** For instruction on how to install a DMX terminator, see “5.4. DMX Terminator” on page 11.
  • Page 16: Warranty And Service

    Alternatively, you can send the product to CENTOLIGHT SERVICE CENTER – Via Enzo Ferrari, 10 – 62017 Porto Recanati - Italy. In order to send a product to service center, you need an RMA num- ber.
  • Page 17 Manuale Utente SCENIC W504 oMMario 1 - Prima Di Iniziare 1.1. Cosa è Incluso - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18 1.2.
  • Page 18: Prima Di Iniziare

    1 - P riMa niziare Grazie per aver acquistato il faro SCENIC W504. Prima di iniziare, assicuratevi di leggere attentamente questo manuale! Esso utente è stato creato per fornire sia una panoramica dei controlli, sia informazioni su come usarli. 1.1. Cosa è Incluso...
  • Page 19: Limiti Di Responsabilità

    1.4. Limiti di Responsabilità Le informazioni e le specifiche contenute in questo manuale utente sono soggette a modifiche senza preavviso. CENTOLIGHT non si assume alcuna responsabilità per eventuali errori od omissioni e si riserva il diritto di rivedere o creare questo manua- le in qualsiasi momento.
  • Page 20: Montaggio E Appendimento

    Manuale Utente SCENIC W504 3 - M onTaggio e PPendiMenTo Prestare attenzione alla sicurezza! Si prega di fare sempre riferimento alla direttiva EN 60598-2-17 e agli standard nazionali in fase di installazione. Solo personale autorizzato può eseguire l’installazione. 3.1. Installazione Sospesa L’installazione del dispositivo deve essere progettata e costruita in un modo che...
  • Page 21: Calore

    4 - i nTroduzione Scenic W504 è un PAR a LED compatto e leggero pensato per eventi live, installa- zioni in club e discoteche e tutte quelli applicazioni indoor dove sono richieste luci bianche con differenti temperature e fascio con apertura piuttosto stretta (25°). Le sorgenti luminose sono 4 LED da 50W (2 con bianco caldo a 3200°K;...
  • Page 22: Dimensioni Del Prodotto E Panoramica

    Manuale Utente SCENIC W504 Fino a 109000lux @ 1m Miscelazione di Bianco caldo (3200°K) e Bianco Puro (5600°K) Emissione LED senza sfarfallio per applicazioni broadcast Angolo del fascio a 25° con controllo dimmer avanzato ed effetti strobo Controllo della velocità della ventola intelligente...
  • Page 23: Setup Del Prodotto

    Manuale Utente SCENIC W504 5 - s eTuP del ProdoTTo 5.1. Descrizione del pannello posteriore MENU DOWN ENTER Il pannello di controllo include l’area del display a LED e dei tasti di controllo. 1) Display a LED a 4 cifre Mostra la modalità...
  • Page 24: Connessioni Di Rete

    Manuale Utente SCENIC W504 Power Input 100-240Vac - 50/60Hz 1st Unit 2nd Unit 3rd Unit 4th Unit 5th Unit 4) Prese di ingresso / uscita DMX L’ingresso DMX è una presa XLR maschio a 3 pin per la connessione a una centrali- na di controllo DMX.
  • Page 25: Terminatore Dmx

    Manuale Utente SCENIC W504 ca a ciascuna apparecchiatura. Utilizzare un ordine che preveda il cablaggio più semplice e diretto. DMX Termonator Uso dei 3-Piedini nei Connettori XLR per DMX INGRESSO USCITA 3-Poli XLR Unit 1 Unit 2 Last Unit Piedino 1: MASSA...
  • Page 26: Funzionamento Dei Menu

    Manuale Utente SCENIC W504 5-Pins XLR (socket) 3-Pins XLR (plug) Pin 1: GND (Screen) Pin 1: GND (Screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C...
  • Page 27: Impostazione Dell'indirizzo Dmx

    è probabile che si limiti l’accesso ad alcuni dei canali del prodotto. Scenic W504 utilizza 6 canali DMX o 2 canali DMX (in base alla modalità DMX scel- ta), che definiscono, rispettivamente, il più alto indirizzo configurabile a 505 o 511 per controllare tutti i canali possibili.
  • Page 28: Modalità Master/Slave

    Il rumore della ventola @ 1m è sempre 43dBA circa. 6.4. Modalità Master/Slave Nel caso in cui sia voglia controllare più SCENIC W504 insieme (tutti i fari funzio- nano allo stesso modo) senza l’uso di un controller DMX, è possibile usare il modo master/slave.
  • Page 29: Specifiche Tecniche

    * Per contattare il Servizio Assistenza Centolight, consultare il paragrafo “9 - Garanzia e Assistenza” a pagi- na 30 o visitate il sito www.centolight.com ** Per istruzione su come installare un terminatore DMX, vedere “5.4. Terminatore DMX” a pagina 25.
  • Page 30: Garanzia E Assistenza

    9 - g aranzia e ssisTenza Tutti i prodotti CENTOLIGHT sono coperti da garanzia di due anni. Essa è valida dalla data di acquisto, come indicato dal documento di acquisto. I seguenti casi/ componenti non sono coperti dalla garanzia di cui sopra:...
  • Page 31 Questo prodotto viene importato nella UE da FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy CentoLight® is a registered trademark of FRENEXPORT SPA - Italy CentoLight® è un marchio di fabbrica registrato di FRENEXPORT SPA - Italia...
  • Page 32 Ver. 1.0 - Jul 2021...

Table of Contents