Microsoft Xbox 360 Setting Up
Hide thumbs Also See for Xbox 360:

Advertisement

About Xbox Live

Xbox Live allows your system to access the
internet and interact with other players through
multiplayer. In order to use Xbox Live you
must have the following:
• A registered gamer profile
• A registered Microsoft account
• Purchased Xbox Live membership
license
• Internet source
• Wireless internet adapter or Ethernet
cable

Setting up Xbox Live

Step 1: Turn on your Xbox 360 by pressing the
power button on your Xbox.
Step 2: Press the home button on the controller
(the middle button with the Xbox logo).
Step 3: Scroll rightward using the left analog
stick to the settings tab.
Step 4: Scroll down to "System Settings" and
press A to select it.
Step 5: Scroll down to "network settings" and
press A again.
Step 6: Skip to step 9 if using a wireless
connection, otherwise proceed to step 7 if
using a direct connection.
Step 7: Connect an Ethernet cable to the
Ethernet port at the back of the system, and
then to your modem or other internet source.
The Xbox will automatically detect the
network and dis
Figure 6: Connected Ethernet cable.
Step 8: Select the wired network icon by
hovering over it and pressing A.
Step 9: If using a wireless connection, connect
the wireless adapter to the system by first
connecting the USB and then locking the
adapter to the mounts at the back of console
(see fig. 7).
Figure 7: Connected Wireless Adapter.
Step 10: select the desired network from the
list of detected wireless networks and press A
to connect to that network.
Step 11: Enter the network password if
prompted.
Setting Up
Your

Introduction

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Xbox 360 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Microsoft Xbox 360

  • Page 1 Setting up Xbox Live adapter to the mounts at the back of console (see fig. 7). Step 1: Turn on your Xbox 360 by pressing the power button on your Xbox. Step 2: Press the home button on the controller (the middle button with the Xbox logo).
  • Page 2 This brochure is for setting up your Xbox 360. Step 2: Plug the power cord into the power Connecting Xbox to the TV To use this brochure you must first buy an adapter. Xbox 360 console and a game. Step 1: Plug the HDMI cord onto your TV’s HDMI output.

Table of Contents