Table of Contents
Advertisement
User Guide
No LEDs lit
• No mains supply
Check the fuse in the supply to the Q-pedal.
Check the mains supply.
TECHNICAL SPECIFICATION.
Size:
Weight:
Maximum load:
2.3kVA corresponds to a resistive load of 2300 Watts or an
inductive load of approximately 1500 Watts depending on power
factor.
Maximum total load:
4.6kVA corresponds to a resistive load of 4600 Watts or an
inductive load of approximately 3200 Watts depending on power
factor.
Reduce to 13 Amps (2.99kVA) if connected using a British
BS1363 mains plug and socket.
Power requirements:
Mains input:
Outputs:
Fuses:
A "high breaking capacity fuse has a ceramic case.
Triacs:
Type:
The Q-pedal complies with:
EN60065 (European Electrical Safety Standard)
EN55103 (Electromagnetic Compatibility Standard)
© NJD Electronics 2003
405mm × 201mm × 58mm
3.1kg
10 Amps per channel
2.3kVA @ 230V AC
20 Amps
4.6kVA @ 230V AC
230V AC 5VA
2
2.5mm
cable to BS6500
Harmonised code H05VV-F
F321BA 7-pin sockets
F5A High breaking capacity to IEC127
16 Amp 600Volt isolated tab.
BTA62-600B
Safety Standards
Q-PEDAL
-Page 7-
Advertisement
Table of Contents
