Skil 3821 Owner's Manual page 20

Unpacking and Checking
Contents
CAUTION
45° left or right position. Lock bevel lock
handle. Lock head assembly in the down
position.
Never carry the tool by the cord or head
assembly power switch handle. Damage
to insulation could cause an electric shock.
Damage to wire connections could cause a
fire.
Model 3821 Compound Miter Saw is shipped
complete in one box.
1. Separate all parts from packing materials
and check each one with the "Table of Loose Parts" to make sure all items are accounted
for before discarding any packing material.
2. Loose Parts:
Vertical Clamp - Provides fast clamping of workpiece.
•
Hex Wrench - Stored behind sliding fence.
•
Miter Lock Knob
•
Dust Bag
•
Extension Rails (2)
•
Extension Table with Thumbscrew
•
Stop Block
•
Operating/Safety Instructions
•
WARNING
Installation of Miter Lock Knob
1. Locate Miter Lock Knob from Loose Parts.
2. Assemble Miter Lock Knob into front of Table as shown in Figure 1.
Do Not Over Tighten.
20
Before moving the saw:
Lock the miter lock knob in
If any parts are missing, do not plug in power cord or turn the switch on
until the missing parts are obtained and are installed correctly.
Fig. 1