Garden Furniture Direct Ambleside disabled access picnic bench Assembly Instructions

Table of Contents

Download this manual

Garden

Fu u

03333 448 121

Before you commence the assembly process we recommend that you read these instructions

thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have

the correct components. If for any reason you need assistance, you can find our contact details on the

final page of these instructions.

We highly recommend that any assembly is carried out on a flat, level surface if possible and that you

use another person to assist you if necessary.

Package contents

1 x Table top

2 x Seats

3 x Table A frames

2 x Cross braces

20 x M8 Coach screws

Cover caps

rnitu re

Direct

The Ambleside disabled access picnic bench

ASSEMBLY

INSTRUCTIONS

Ambleside disabled

access picnic bench

10mm socket or spanner

Table of Contents

Do you have a question about the Ambleside disabled access picnic bench and is the answer not in the manual?

Page 1 Package contents Tools required 1 x Table top 10mm socket or spanner 2 x Seats 3 x Table A frames 2 x Cross braces 20 x M8 Coach screws Cover caps The Ambleside disabled access picnic bench...
Page 2 Ambleside disabled access picnic bench Step 1 Step 2 Ensure that you have all of the correct parts as listed Lay the table top upside down on a clean, flat surface on the front page of these instructions, including any taking care not to damage it.
Page 3 Ambleside disabled access picnic bench Step 5 Step 6 Repeat steps 3 & 4 for the remaining 2 A-frames so Position one of the braces as shown ensuring that it is that they match the image above and the centre A- aligned centrally along the table top and that it is frame is oriented as shown.
Page 4 Ambleside disabled access picnic bench Step 9 Step 10 Now turn the bench assembly right side up ready to Line up the short seat panel as shown and attach to attach the seats. the A-frame with 2 coach screws in each end.