Garden Furniture Direct WINDERMERE OCTAGONAL TABLE Assembly Instructions

Table of Contents

Download this manual

Garden

Fu u

03333 448 121

Before you commence the assembly process we recommend that you read these instructions

thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have

the correct components. If for any reason you need assistance, you can find our contact details on the

final page of these instructions.

We highly recommend that any assembly is carried out on a flat, level surface if possible and that you

use another person to assist you if necessary.

Package contents

1 x Table top

4 x Seats

2 x A-frames

M8 Coach Screws

Cover Caps

rnitu re

Direct

octagonal/circular Table

Windermere octagonal table

ASSEMBLY

INSTRUCTIONS

Windermere

10mm socket or spanner

Table of Contents

Do you have a question about the WINDERMERE OCTAGONAL TABLE and is the answer not in the manual?

Page 1 We highly recommend that any assembly is carried out on a flat, level surface if possible and that you use another person to assist you if necessary. Package contents Tools required 1 x Table top 10mm socket or spanner 4 x Seats 2 x A-frames M8 Coach Screws Cover Caps Windermere octagonal table...
Page 2 Windermere octagonal/circular table Step 1 Step 2 Ensure that you have all of the correct parts as listed On a flat, level surface take the bottom A-frame, on the front page of these instructions, including any which is identified by the slots being on TOP of the fixings.
Page 3 Windermere octagonal/circular table Step 5 Step 6 Carefully lower the table top onto the frame ...and then confirm the correct alignment by looking assembly and centre it on the legs... directly down through the parasol hole. Step 7 Step 8 Now attach the table top to the leg assembly using 2 Lower one of the seat panels onto the frame as coach screws per leg.
Page 4 Windermere octagonal/circular table Step 9 Step 10 ...and attach it to the leg using a coach screw..noting the clearance between the seat and the upper surface of the frame assembly. Repeat steps 8 - 10 for the remaining seat units. Step 10 Your Windermere table is now complete.

Windermere circular table