Download Print this page

Garden Furniture Direct Carlisle Assembly Instructions Manual

6/4ft log and tool store

Advertisement

Quick Links

Ga
Garden
Fu u
T:
03333 448 121
Before you commence the assembly process we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary.
Package contents
3 x Doors
2 x End panels
3 x Back panels
1 x Base
1 x Lattice
1 x Roof
4 x Centre Posts
65mm Screws
16 x 85mm Screws (For the Base only)
2 x Spacer Blocks
rnitu re
Direct
ASSEMBLY
INSTRUCTIONS
Carlisle 6/4ft log
and tool store
Tools required
Electric screwdriver with No2 Pozidrive bit
Or No2 Pozidrive Screwdriver
Carlisle Log Store
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Carlisle and is the answer not in the manual?

Questions and answers

Summary of Contents for Garden Furniture Direct Carlisle

  • Page 1 INSTRUCTIONS Fu u rnitu re Direct Carlisle 6/4ft log 03333 448 121 and tool store Before you commence the assembly process we recommend that you read these instructions thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have the correct components.
  • Page 2 Carlisle 6/4ft log and tool store Step 1 Step 2 Stand the left hand end panel (or right hand for the Arrange the 2 spacer blocks on the ground, adjacent reversed roof version) upright on a flat, level surface. to the end panel as shown in the photo above. Now place a back panel on the blocks, at 90°...
  • Page 3 Carlisle 6/4ft log and tool store Step 5 Step 6 Attach the panel to the post by screwing through the Rearrange the spacer blocks and offer up the next batten using 65mm screws as before. panel, aligning and attaching it as before.
  • Page 4 Carlisle 6/4ft log and tool store Step 9 Step 10 Attach the base to the end panel front post first, Now attach the base to the end panel rear post using using 2 of the 85mm screws. two more 85mm screws.
  • Page 5 Carlisle 6/4ft log and tool store Step 13 Step 14 Carefully place the roof on top of the end panel posts Secure the rear of the roof using 65mm screws as ensuring that the batten ends sit flush with the posts shown.
  • Page 6 Carlisle 6/4ft log and tool store Step 17 Step 18 With the centre post lined up with the guide marks Check the positioning of the post within the guide on the base, locate the top of the post between the...
  • Page 7 Carlisle 6/4ft log and tool store Step 21 Step 22 Secure the top hinge in place using more of the black Stand the dividing panel in position and using the hinge screws. Repeat steps 20 - 22 for any further 65mm screws, fix it to the rear batten.
  • Page 8 Carlisle 6/4ft log and tool store Step 25 Step 26 Your Carlisle log and tool store is now complete. The hasp is already screwed onto the front of the door. Close the door and hold the hasp horizontal, then position the staple and fix into place.