Advertisement
3.1.3 Removing the front panel and the touch panel
(See Fig.4, 5)
(1) Remove the four screws C attaching the front panel. (See
Fig.4)
(2) Disconnect the flexible wire of the touch panel from the
connector
CN700
of the main board. (See Fig.5)
(3) Take out the front panel, the caution label and the touch
panel. (See Fig.5)
3.1.4 Removing the LCD
(See Fig.6)
(1) Disconnect the flexible wire from the connector
the main board and then take out the LCD.
3.1.5 Removing the HDD
(See Fig.4)
(1) Remove the one screw D attaching the earth wire.
(2) Disconnect the hard disc connector from the HDD.
(3) Take out the HDD and HDD cover.
Hard disc connector
C
Front panel
CN350
of
CN350
Fig.4
CN700
Fig.5
Fig.6
(No.MA272)1-5
D
Advertisement
