Table of Contents
Advertisement
O P E R ATING C O N T R O L S A N D ADJUSTMENTS
STA R T-STO P SWITCH
The start-stop switch is conveniently located on a post,
behind the jointer fence, for easy accessibility.To s ta r t
the machine, simply press the start button (A) F i g . 1 8 ,
and to stop the machine, press the stop button (B).
FENCE O P E R ATION
1 . The fence (A) Fig. 19, can be moved across the table
by loosening lock lever (B) and rotating handwheel (C).
A fter the fence is moved to its desired position, retighten
lock lever (B) securely. NOTE: Lock lever (B) can be re-
positioned by pulling out the handle and repositioning it
on the serrated nut located underneath the hub of the
handle. As the fence (A) is moved across the table, the
sliding portion of the column (D) guards the cutterhead in
back of the fence as shown.
2 . To t i l t t h e f e n c e ( A ) to the right, as shown in F i g . 2 0 ,
o r t o t h e l e ft, as shown in Fig. 21, loosen lock handle (E)
move the fence to the desired angle and tighten handle
(E) securely. NOTE: Handle (E) Figs. 20 and 21, is
spring-loaded and can be repositioned by pulling out the
handle and repositioning it on the serrated nut located
underneath the hub of the handle. Also, when tilting the
fence to the right (outward) as shown in Fig. 20, the stop
( F ) Fig. 20, must be rotated to the up position as shown.
IMPORTA N T:When cutting a bevel, we suggest that
whenever possible the fence (A) be tilted toward the
t able, as shown in Fig. 21. The fence will then form a
V-shape with the tables, and the work is easily pressed
into the pocket while passing it across the knives.
B
D
C
B
11
A
Fig. 18
Fig. 19
E
F
A
Fig. 20
E
A
Fig. 21
A
Advertisement
Table of Contents
