Time Functions; View Time Zone 1 / Time Zone 2; Setting The Time Of Day - HighGear Aerial User Manual

MODES OF OPERATION
MAIN DISPLAY MODES
(continued)
ALTIMETER LOG
CHRONOGRAPH
DATA
13
ALTIWARE SERIES
CHRONOGRAPH
SKI CHRONOGRAPH

TIME FUNCTIONS

VIEW TIME ZONE 1 / TIME ZONE 2

The Alterra/Aerial unit is equipped with a full feature wrist watch
package including Time of Day, Day/Date/Day of Week, Two Time Zones
and Two Daily Alarms.
The Time Zone being displayed is indicated by a small T1/T2 in the
lower left corner of the display.
VIEW / CHANGE TIME ZONE:

SETTING THE TIME OF DAY

1. Start in TIME Mode.
2. Select TIME 1 or TIME 2 using the
3. PRESS & HOLD
4. Adjust HOUR, MINUTES, SECONDS, YEAR, MONTH, DATE,
12/24 HOUR mode using the
programmed (Hours, Min, Sec, etc.) will be shown in the Bottom
Line of the display.
5. Set each variable using the a
6. Exit setting sequence using the
7. Select alternate time and repeat the above procedure.
ALARM
PRESS & HOLD the S2 key
S2 key.
the S5 to enter the setting sequence.
S1 and S2 keys. The variable being
QUICK PRESS of the S4 key.
S5 key.
alterra/aerial
14