1. Manuals
  2. Brands
  3. Belanger Manuals
  4. Industrial Equipment
  5. SABER SL-2
  6. Programming and operations manual

Belanger SABER SL-2 Programming And Operations Manual

Operator station
Hide thumbs
Table of Contents

Advertisement

Quick Links

SL-2
1063
1MANUL294
OPERATOR STATION
Belanger, Inc.
P.O. Box 5470
PROGRAMMING AND
Northville, MI 48167-5470
Customer Service Phone (248) 349-7010
Fax (248) 380-9681
OPERATION MANUAL
www.Belangerinc.com
REV 03

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SABER SL-2 and is the answer not in the manual?

Questions and answers

Garry
April 14, 2025

on Pre-soak 2 both pumps run, how do i stop both pre soak and pre-soak 2 pump running at same tim?

0
1 comments:
Mr. Anderson
April 15, 2025

To stop both pumps from running simultaneously during Pre-soak 2 on the Belanger SABER SL-2, ensure that Pre-Fill is not active. For Pre-Fill to function, both passes must meet specific conditions, such as using the same pump speeds, reclaim settings, tank size, and not having a Purge Time or Dwell Time. By changing one of these conditions—such as using different pump speeds or enabling a Purge Time or Dwell Time—you can prevent Pre-Fill from activating, which will stop both pumps from running at the same time.

This answer is automatically generated

0

Related Manuals for Belanger SABER SL-2

Summary of Contents for Belanger SABER SL-2

  • Page 1 SL-2 1063 1MANUL294 OPERATOR STATION Belanger, Inc. P.O. Box 5470 PROGRAMMING AND Northville, MI 48167-5470 Customer Service Phone (248) 349-7010 Fax (248) 380-9681 OPERATION MANUAL www.Belangerinc.com REV 03...
  • Page 3 Do not make additional copies of this manual or electronically transmit it in any form ® whatsoever, in whole or in part, without the prior written permission of Belanger, Inc. The registered trademarks used in this document are the property of their respective owners. The use of such trademarks is ®...

  • Page 7: Table Of Contents

    Chapter 5 Techniques in Programming ................... 5-1 Typical Setup Examples ..........................5-1 Configuring the Multifunctional Sonar Unit ....................5-2 Changing the Parameters .......................... 5-2 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...
  • Page 8 Chapter 7 Network and E-mail ....................7-1 Activate Network Screen ........................... 7-1 Main Network Screen ..........................7-2 SMTP Client .............................. 7-3 Remote Access ............................7-4 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 9: Chapter 1 Operator Interface/Standard User Screens

    Chapter 1 Operator interface/Standard User Screens Chapter 1 Operator Interface/Standard User Screens...

  • Page 11: Queue

    Pressing “Reset All” will clear the values of the total data and package data accumulated since Reset All was last pressed. 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 12: User

    STORE PATTERN. Now you are to name the Pattern. To use the stored Pattern in the future, press the MAKE CURRENT button. Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...

  • Page 13: User / Jog

    • A filled oval indicates that an Output is ON • Some Outputs are namable and will not be the same as names indicated to the left 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 14: User / About

    The “DRIVE CODE” field is covered on the next page. Note: FAULT status 255 is for “System Ok”. See Chapter 6 for Fault Information. Note: Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...

  • Page 15: Faults / Alarms

    • Pressing the Auto Capture toggle button alternated between the fields shown below: • Capture: captures (updates) status and conditions at the instant button is pressed 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 17: Chapter 2 General Methods Of Using Operator Interfaces

    Chapter 2 General Methods of Using Operator Interfaces Chapter 2 General Methods of Using Operator Interfaces...
  • Page 19 When done entering the data, press .to return to the original screen. To leave the Data Entry screens without changing data, press 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...
  • Page 20 . When done entering the data, press .to return to the original screen. To leave the Data Entry screens without changing data, press Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...

  • Page 21: Chapter 3 Operator Interface/Programming

    Chapter 3 Operator Interface/Programming Chapter 3 Operator Interface/ Programming...

  • Page 23: Setup

    Setup / Package 1 - 8 Screen Key E-1063 • Pressing any Package number moves you to that corresponding Package Setup screens 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 24: Setup / Package 1 - 8 / Package 1

    • The lower 3 are Exit Operation 1, 2 and 3 • Toggling any to YES will include that feature (Operation) on that package Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...

  • Page 25: Setup / Application Setup

    • Both passes are of the same type as selected by Center = “________” in the Application Configuration screen Setup / Advanced Configuration See Chapter 6. 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 26: Setup / Entrance Operation

    Pump: This is the pump speed measured in percent for Entrance Operation that is utilizing the 25HP VFD Pump. Only Entrance Operation 1 or Entrance Operation 3 may utilize this pump. Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...

  • Page 27: Setup / Exit Operation

    EFP (End Function Pulse): This is designed to turn on exit functions while wash is still in progress. Each package has a Pass Number and a position from completing that pass that it turns on its EFP. 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...
  • Page 28 Max-Time: This is an OFF condition only. It’s a maximum time that a function will stay on once it turns on. Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...

  • Page 29: Setup / Door Control

    Enter Door Photo Eye and Exit Door Photo Eye will always be included in door control when system is in AUTO. The additional Enter Photo Eye and the additional Exit Photo Eye may be ENABLED to be included in Automatic Door Control. 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 30: Setup / Pos (Point Of Sales)

    When in Direct Mode, Input will insert corresponding Package into Loader (i.e. if PACKAGE 1 is displayed, PACKAGE 1 will be loaded into the Loader when Input X15 turns ON). Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...

  • Page 31: Setup

    When in Binary Mode each Input is given a value. The Package that is inserted in the Loader is determined by the sum of the Inputs turned ON (have filled ovals). Examples: 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...
  • Page 32 Some cell phone providers have systems that require too many buttons and confirmation keys to be pressed making it impossible to send a page automatically. 3-10 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...

  • Page 33: Setup / Misc

    “4-Application Point” XR has been installed. Not typical. HIGH PRESSURE EXCHANGE TIME: This is the FILL TIME when the High Pressure application switches sides. 3-11 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 34: Setup / Misc / Sonar

    LED. If not, use a magnet to shift modes until the mode is correct. If not, see chapter 4 of this document for instructions on how to change the parameters of the Multifunctional Sonar unit. 3-12 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...

  • Page 35: Setup / Misc / More

    THERMO SECONDS: This is the run-time of the Thermo-Cycle. It will run the Pump at 15% through the High Pressure path for the set amount of time. 3-13 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...
  • Page 36 EMPTY BAY PURGE TIME: This is the amount of time measured in seconds that the machine will use Pulse air to flush the manifolds when the system is “Not in Use”. 3-14 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...
  • Page 37 Chapter 4 –Operator Interface/Advanced Operation Chapter 4 Operator Interface/Advanced Operation...

  • Page 39: Chapter 4 Operator Interface/Advanced Configuration

    Enter pumps via [ENTER OPERATION 1 / ENTER OPERATION 3]: Select which will control the 25HP pump during Entrance Operation. NOTE: Output naming and application configuration need modified to operate ICS instead of SDM Chemical Delivery System. 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 40: Advanced Configuration / Application Configuration

    Screen Key Screen shows MISCELLANEOUS OUTPUT • 1 – 7 These can not be linked to Entrance and • Exit Operations Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...
  • Page 41 Inches”. in Inches”. Each MISC 1 – 7 Each MISC 1 - 7 have one ON have one OFF position. position. 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...
  • Page 42 This toggles to PURGA ALL PASS to purge the entire application. This is to purge while the machine is moving before the On-Board Dryer. This works for AC4 only. Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...
  • Page 43 FS 050 FS 100 MISC 2 FS 050 FS 100 Carriage Travel Direction Carriage Travel Direction Carriage Travel Direction Carriage Travel Direction 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...
  • Page 44 It will extend the Carriage travel to expand dryer coverage. On-Board Dryer passes must be the last ones in a Package. Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...

  • Page 45: Advanced Configuration / Output Naming

    The field to the right of MISC 1 through 8 is • the name that has been assigned to that output Touch the assigned name to edit the • Outputs name 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 47: Chapter 5 Techniques In Programming

    Chapter 5 –Techniques in Programming Chapter 5 Techniques in Programming...

  • Page 49: Typical Setup Examples

    0.1 seconds after the vehicle has arrived at the Wash Position and received a Stop Light • After the Rocker Blaster has been ON for an elapsed time of 45 seconds • 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 50: Configuring The Multifunctional Sonar Unit

    6. The LED will flash a pulse count identifying the mode that it is in. the model number for the Multifunction Sonar Unit is IRU2005R. The Belanger part number is 1ELECT-SN950. Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...

  • Page 51: Chapter 6 Faults And Alarms

    Chapter 6 –Techniques in Programming Chapter 6 Faults and Alarms...

  • Page 53: Fault Codes And Names

    This fault occurs when the Carriage Drive signals the carwash controller that it has faulted. BUTTERFLY DRIVE FAULT This fault occurs when the Butterfly Drive signals the carwash controller that it has faulted. 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 54: Pump Drive Fault

    Carriage away from the vehicle before attempting to reset the knuckle. If the arm breaks away while attempting to butterfly IN, it will immediately butterfly OUT before attempting to reset the knuckle. Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...
  • Page 55 This alarm occurs when Position Resets to ZERO at the Enter Limit but the Carriage Position Error at the time of correction was 30 or greater. 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 56: Drive Codes

    COMMUNICATION LEAVE FAULT RETRY COUNT EXCEEDED PR. 24 ALARM FAULT 3 E. 3 FAULT 6 E. 6 FAULT 7 E. 7 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...

  • Page 57: Chapter 7 Network And E-Mail

    Chapter 7 –Network and E-mail Chapter 7 Network and E-mail 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...
  • Page 58 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...

  • Page 59: Activate Network Screen

    If it times out you will have to perform the calibration before configuring the network settings. Calibration screen shown on the lower-right. 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 60: Main Network Screen

    TOUCH ANYWHERE ON SCREEN OR TOUCH CALIBRATE WILL START IN 7 SECONDS Carefully press and briefly hold stylus on the center of the target. Repeat as it moves around screen Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...

  • Page 61: Smtp Client

    2: Sent e-mail for Shift, Daily, Weekly Report 3: Sent e-mail of Fault Report 3: NOT Sent e-mail for Shift, Daily, Weekly Report 1MANUL294 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681...

  • Page 62: Remote Access

    VNC into your favorite search engine to find these web sites. Note: Static ID Address recommended to utilize remote access. E-mail will work with either a static or dynamic IP address. Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL294...
  • Page 63 Chapter 8 –E-1063 Screen map Chapter 8 E-1063 Programming Screen Map...
  • Page 65 SL2: 1063 PROGRAMMING AND OPERATION...
  • Page 68 Belanger, Inc. * P.O. Box 5470 * Northville, MI 48167-5470 Customer Service Phone (248) 349-7010 * Fax (248) 380-9681 SL2: 1063 Operator Station Programming and Operation Manual 1MANUL294...

Table of Contents

Save PDF