Dubbing; Dubbing To Or From A Vcr - JVC GR-D70 Instructions Manual

Dubbing To Or From A VCR

To Use This Camcorder As A Player
1
Following the illustration, connect the camcorder
and the VCR. Also refer to pg. 16.
2
Set the VIDEO/MEMORY Switch
then set the camcorder's Power Switch
while pressing down the Lock Button
switch, turn on the VCR's power, and insert the
appropriate cassettes in the camcorder and the VCR.
3
Engage the VCR's AUX and Record-Pause modes.
4
Engage the camcorder's Play mode to find a spot
just before the edit-in point. Once it is reached, press
7
on the camcorder.
4/6
5
7
Press 4/6 on the camcorder and engage the
VCR's Record mode.
6
Engage the VCR's Record-Pause mode and press
7
on the camcorder.
4/6
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
● As the camcorder starts to play your footage it will appear
on your TV. This will confirm the connections and the AUX
channel for dubbing purposes.
● Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
● Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not
accept Y/C signals and uses an audio/video
cable.
To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time
..... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen ( pg. 30, 32).
Or, press DISPLAY
on/off the date indication.
• Time Code
..... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 31, 32).
• Indications other than date/time and time code
..... set "ON SCREEN" to "LCD", "LCD/TV" or "OFF" in
the Menu Screen (
To Use This Camcorder As A Recorder (GR-D70
only)
1. Set the VIDEO/MEMORY Switch
then set the camcorder's Power Switch
"PLAY" while pressing down the Lock Button
located on the switch.
2. Set "S/AV INPUT" to "ON" and set "REC MODE" to
"SP" or "LP" ( pg. 31).
4
to "VIDEO",
u
to "PLAY"
y
located on the
;
on the remote control to turn
pg. 30, 32).
4
to "VIDEO",
u
to
y
3. Connect the cables as shown in the illustration and
load a cassette to record on.
4. Press the Recording Start/Stop button
engage the Record-Pause mode. "
appears on the screen.
5. Press the Recording Start/Stop button
3
recording. rotates.
6. Press the Recording Start/Stop button
engage the Record-Pause mode.
rotating.
NOTES:
● To use an output cable adapter (commercially available),
refer to its instructions.
● After dubbing, set "S/AV INPUT" back to "OFF".
● Analogue signals can be converted to digital signals with
this procedure.
● It is also possible to dub from another camcorder.
To
q
S-VIDEO
S-Video cable
(optional)
Cable
Adapter***
VCR
* When connecting the cables, open this cover.
** Connect when an S-Video cable is not used.
*** If your VCR has a SCART connector
To use this camcorder as a player ➝ use the provided
cable adapter.
To use this camcorder as a recorder (GR-D70 only) ➝
use a commercially available output cable adapter.
e
to
"
A/V IN
e
to start
e
again to
3
stops
(
To AV
Connector
cover*
Audio/Video
cable
(provided)
To AUDIO, VIDEO**
and S-Video
connectors
TV

DUBBING

EN
33