Connections - JVC GR-D70 Instructions Manual

1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as shown
in the illustration.
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3
Connect the VCR output to the TV input, referring to
your VCR's instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set the TV
to its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time
..... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen (
Or, press DISPLAY
turn on/off the date indication.
• Time Code
..... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 31, 32).
• Indications other than date/time and time code
..... set "ON SCREEN" to "LCD", "LCD/TV" or "OFF" in
the Menu Screen (
NOTES:
● It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
● Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not
accept Y/C signals and uses an audio/video
cable.
● To monitor the picture and sound from the camcorder
without inserting a tape or memory card, set the
camcorder's Power Switch
your TV to the appropriate input mode.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound when the
camcorder is turned on.
● If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the TV as
interference will occur in the camcorder playback picture.
● If no image is displayed or no sound is heard from the TV,
set "S/AV INPUT" to "OFF" in the Menu Screen
(GR-D70 only, pg. 31).
● While the Audio/Video cable is connected to the AV
connector, sound cannot be heard from the speaker.
EN
16
TAPE PLAYBACK

Connections

pg. 30, 32).
;
on the remote control to
pg. 30, 32).
u
to " " or " ", then set
To
S-VIDEO
S-Video cable
(optional)
"Y/C"/"CVBS"
video out
select switch
To TV or VCR
pg. 7).
* When connecting the cables, open this cover.
** The Audio cable is not required for watching still images
only.
*** Connect when an S-Video cable is not used.
To AV
Connector
cover*
Audio/Video
cable
q
(provided)
To AUDIO**,
VIDEO***
and -IN
connectors
If your VCR has the
SCART connector,
use the provided
cable adapter.
VCR
(
TV