Table of Contents
Advertisement
2
Detach the end of the Grip Belt.
3
Slide A to the direction of the arrow and
reattach the Grip Belt.
4
Attach the Grip Belt around your wrist.
≥When returning the Grip Belt to the Grip Belt
Attachment, press the Lock Cover 2 to ensure
that it is securely locked.
Attaching the Lens Cap
To protect the Lens surface, attach the Lens Cap.
1
Pass one end of the Lens Cap Cord through
the attached eye on the Lens Cap. Then
pass the other end through the loop made
by itself and pull tight.
2
Pass the end of the Lens Cap Cord through
the hole in the Grip Belt Attachment and the
Lens Cap through the Lens Cap Cord.
≥The removed Lens Cap can be hooked onto the
Grip Belt. (It is not possible when using as a
hand strap.)
Before Use
A
2
≥When you are not recording, be sure to cover
the Lens with the Lens Cap for protection.
Attaching the Shoulder Strap
We recommend that you attach the Shoulder
Strap before going out of doors to record so as to
avoid dropping the Movie Camera.
1
Pull the end of the Shoulder Strap through
the Shoulder Strap Holder on the Movie
Camera.
2
Fold the end of the Shoulder Strap, run it
through the Shoulder Strap Length
Adjuster, and pull it.
≥Pull it out more than 2 cm 1 from the
Shoulder Strap Length Adjuster so that it
cannot slip off.
≥Attach the other end of the Shoulder Strap to
the other Shoulder Strap Holder in the same
way.
Inserting a Cassette
1
Slide the [OPEN/EJECT] Lever
the front and pull down to open the
Cassette Compartment Cover.
2
Insert a Cassette.
-62-
1
(41)
(41)
toward
Advertisement
Chapters
Table of Contents
