Attaching The Lens Cap; How To Remove The Sensor Tag (For U.s.a. Only); The Grip Belt - Panasonic PV-GS320 Operating Instructions Manual

(32)
(32) Tripod receptacle
This is a hole for attaching the Camcorder to
optional tripod. (Please carefully read the
operating instructions for how to attach the tripod
to the Camcorder.)
≥You cannot open the card slot cover when the
tripod is used. Insert the card first and then
attach the tripod.
1
(33)
(33)
Lens hood
In order to remove the lens hood, rotate it
counter-clockwise 1. In order to fit it, place into
slot 2 and then rotate it clockwise.

Attaching the lens cap

Fit the lens cap to protect the surface of the lens.
≥The lens cap and the lens cap cord come pre-
attached to the grip belt.
≥When not using the lens cap, pull the lens cap
cord in the direction of the arrow. 1
≥When you are not recording, be sure to cover
the lens with the lens cap for protection. 2
1
14
LSQT1091
Before using
≥When you remove the lens cap, press the knobs
How to remove the Sensor tag
(for U.S.A. only)
1
2
2

The grip belt

Adjust the belt length so it fits your hand.
1
2
firmly.
Flip the grip belt.
Remove the Sensor tag and then fix the grip
belt.
Adjust the belt length and the pad position.
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.
2
1
3