Battery Usage; Battery Installation; Battery Removal - Pantech Hero User Manual

BATTERY USAGE

■ BATTERY INSTALLATION

As shown in the picture below, position the metal locators of the
battery in the holes located in the bottom of the device.
➊
Place the battery on the back of the device and
slide into place.
➋
Push the battery down until it locks into place.

■ BATTERY REMOVAL

➊
Pull down the release latch, then lift up the battery.
➋
Remove the battery from the device.
If the battery is not correctly placed in the compartment,
the device will not turn on and/or the battery may detach
during use.
BEFORE USING
15