Canon Perfect Binder-F1 User Manual page 61

Adjusting the Trim Location
The trim location can be adjusted if it is out of position.
Specify the trim location in millimeters or inches according to the directions on the
printer's display.
You can set the value from –0.2" to +0.2" [–5mm to +5mm] (in 0.01" [0.1 mm] increments).
 
Leftward orientation Rightward orientation
3
Increase the setting value to shift the trim location down (bottom).
Decrease the setting value to shift the trim location up (top).
Adjusting the Content Page Image Placement
The body page (slip sheet) image placement can be adjusted if it is not correct.
Specify the text image placement in millimeters or inches according to the directions on
the printer's display.
You can set the value from –0.2" to +0.2" [–5mm to +5mm] (in 0.01" [0.1 mm] increments).
Increase the setting value to shift the placement of the image down (bottom).
Decrease the setting value to shift the image placement up (top).
3-18
Adjustments from the Printer Display