Power Supply - Canon Perfect Binder-F1 User Manual

- A location subject to high temperatures
- A location near open flames

Do not remove the machine's leveling feet after the machine has been installed, as
this may cause the machine to fall or tip over, resulting in personal injury.

Contact your local authorized Canon dealer to move the machine.

Power Supply

WARNING

Do not walk on the power cord and do not place heavy objects on it. Doing so could
damage the card after which continued use could result in a fire or electrical shock or
some other malfunction.

Do not damage or modify the power cord. Also, do not place heavy objects on the
power cord, or pull on or excessively bend it, as this could cause electrical damage
and result in a fire or electrical shock.

Do not connect or disconnect the power cord with wet hands, as this may result in
electrical shock.

Do not bundle up or tie the power cord in a knot, as this may result in a fire or
electrical shock.

Do not connect the power cord to a multiplug power strip or overload a single power
outlet with too many power cords, as this may cause a fire or electrical shock.

Keep the power cord away from a heat source; failure to do this may cause the power
cord coating to melt, resulting in a fire or electrical shock.

Always grasp the power plug when disconnecting the power cord. Pulling on the
power cord may expose or snap the core wire, or otherwise damage the power cord. If
the power cord is damaged, this could cause current to leak, resulting in a fire or
electrical shock.

The machine must be connected to a socket-outlet with grounding connection by the
provided power cord.

Do not use power cords other than the one provided, as this may result in a fire or
electrical shock.

The provided power cord is intended for use with this machine. Do not connect the
power cord to other devices.
vii