1. Press the On/Off Button Top Left Corner for 3 seconds (1)
2. The Green Led Will Light to indicate the system is ON.
3. The Time and Day can now be set by hold the Set button (7) on the controller for 3
seconds.
4. The Day will be blinking use the + and – buttons to select the day and confirm with Set
button (7) the day will stop blinking and the time will start
5. Use the + and – button to select the correct time and confirm once again with the set
button (7)
W:
www.seconrenewables.com
Commissioning
T: 0191 516 6554
E:
info@seconrenewables.com