Protecting The Environment; Technical Data; Troubleshooting - DeWalt DWV106 Instruction Manual

ENGlIsh
risk of eye injury, always wear approved eye protection
when performing this.

WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
To keep your wet/dry vac looking its best, clean the outside
with a cloth dampened with warm water and mild soap.
To clean the tank:
1. Dump out debris.
2. Wash tank thoroughly with warm water and mild soap
3. Wipe out with dry cloth.
Storage
Before storing your vac, the dust tank should be emptied
and cleaned. The cord should be wrapped and hung on the
unit and the accessories should be kept in mesh bag so they
can be readily available. The vac should be stored indoors.
Fig. I
Accessories

WARNING: Since accessories, other than those
offered by D WALT, have not been tested with this
e
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only D
recommended accessories should be used with
this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
24
Repairs
The charger and battery pack are not serviceable.

WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement) should
be performed by a D
or a D
identical replacement parts.

Protecting the Environment

Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions.

TEChNICal DaTa

TYPE
Voltage
Frequency
Power
Motor
Tank Capacity
Hose diameter
Hose length
Weight

Troubleshooting


WARNING: to reduce the risk of injury from
moving parts and/or electrical shock, turn
WALT
e
power switch off and disconnect grounded
plug from electrical outlet before performing
troubleshooting checks.
Minor problems often can be fixed without calling customer
service
WALT factory service center
e
WALT authorized service center. Always use
e
AR B2
V 220 220 120 127 220
Hz 50 60
WA
L (Gallons)
in (mm)
ft (m
kg (lbs)
DWV106
B3 BR B2C
60 60 50
1100
Single Stage
6
1-7/8" (47,6)
7' (2,1)
6,7 (14,7)