Scope Of Delivery / Parts List; General; Reading And Storing The User Manual; Symbols Used In This Manual - Walter WWS-120B2-K01 Operating Manual

Scope of delivery / parts list

Scope of delivery / parts
list
1. Welder
2. Operating switch
3. Mains cable with plug
4. Negative terminal (-), Welding cable
connection (DINSE socket 9 mm)
5. Positive terminal (+), Welding cable
connection (DINSE socket 9 mm)
6. Welding current regulator
7. Status indicator
8. Overload indicator
9. Chipping hammer with wire brush
10. DINSE connector
11. Welding cable with electrode holder
12. Clamping lever
13. Electrode terminal
14. Electrode holder
15. Welding cable with earth terminal
16. Protective glass lock (2)
17. Knurled screw M6 × 14 (3)
18. M6 nut (3)
19. Mounting clip (2)
20. Protective glass, light
21. Protective glass, dark
22. Frame for protective glasses
23. Handle
24. Face shield
25. Shoulder strap

General

Reading and storing the user
manual
This operating manual is an integral part of
this inverter welder (hereafter referred to
only as the "welder"). It contains important
information on safety, usage and maintenance.
Read the manual carefully before using the
welder. Pay particular attention to the safety
instructions and warnings. Failure to follow the
instructions in this manual may result in serious
34
injury or damage to the welder. Always include
the manual when you give the welder to others.
Keep this manual in a safe place for future
reference.
The digital form of this operating manual is also
available from the service department of the
manufacturer.
Revision: ID 001 - 2021-10 - REV001

Symbols used in this manual

The following symbols and signal words are used in
this manual, on the welder or on the packaging.
Indicates a hazardous situation
WARNING!
that, if not avoided, could
result in death or serious
injury.
Signals a hazard that can cause
CAUTION!
injuries when ignored.
Warns against possible
NOTE!
damages.
This symbol refers to useful
information on assembly or
usage.
Products marked with this
symbol comply with all
applicable regulations of the
European economic area.
Read the user manual.
Caution!
Wear tight-fitting, suitable
clothing.
Wear safety goggles.
Wear a suitable dust mask.
Wear ear protection.
Wear suitable firm footwear.
Wear appropriate safety gloves.