Page 1
USER’S GUIDE Double walled Maturing tank Ref. 7880/7256/5108 Non-contractual picture THOMAS APICULTURE French designer and manufacturer Of beekeeping equipment ZA de l’Évangile 321, rue Bernard de la Rochefoucauld 45450 Fay-aux-Loges – France Tél: +33 (0)2 38 46 88 00 Fax : +33 (0)2 38 59 28 28 E-mail : contact@thomas-apiculture.com...
Double walled matuing tank : User’s Guide OPERATING PRINCIPLES Totally made of stainless steel, the double oil bath tank is equipped with a sloped flat base (2) allowing a perfect evacuation of the honey via an outlet 40/49 located in the bottom of the appliance. In order not to alter the quality of the honey, it is entirely made of stainless steel.
Double walled matuing tank : User’s Guide USAGE GUIDE • Filling the oil bath Unscrew the vent cap (3) and pour the edible oil into the filler neck (4) until the oil level indicator (5) is reached. For oil pump users, the oil can be filled via the drain valve. •...
Double walled matuing tank : User’s Guide Electronic temperature regulator ON/OFF switch + heat signal POWER switch MAINTENANCE CAUTION : Disconnect the machine from the power supply before any maintenance work. Protect electrical appliances when cleaning. Clean with hot water. The maturing tank is a seasonal equipment but must work regularly throughout the year (at least a few seconds per month when empty, but never without oil).
Double walled matuing tank : User’s Guide Frequent questions CAUTION : Unplug the machine before any maintenance operation. Problem Possible solution - Check that the machine is correctly plugged to a power source. - Check the state of the power source. The machine does not heat up - Raise the temperature and check that the heat signal lights up.
(Monday - Saturday 8:00 am – 8:00 pm) Off season 8H/24 et 5 days /7 (Monday – Friday from 8:00 to 12:00 And from 1:30 pm to 6:00 pm) assistance-technique@thomas-apiculture.com Customer Service : 02 38 46 88 00 From 8:00 am to 12:00 am...
Need help?
Do you have a question about the 7880 and is the answer not in the manual?
Questions and answers