SYSTEM SPECIFICATIONS
System Specifications
A full list of parts supplied with the laser systems appear in Section 3 along with the dimensions (mm) and weights (kg).
These measurements should be referred to whilst integrating the system.
Parts List
The gem laser system comes complete with:
gem laser head
•
smd24 Microprocessor Controlled Power Supply Unit (PSU)
•
Umbilical Cable – to connect the laser head and PSU
•
Important Note: Laser head and PSU are NOT interchangeable and must remain paired to meet specification.
Pairing with another Laser Quantum PSU should not be attempted as this may damage the laser.
Depending on the purchase specification, some or all of the following items may also be included:
External Power Supply Source (Mains AC to 12 V DC Desktop Module)
•
IEC Mains Lead
•
Interlock Dongle – to enable the laser system (Green spot on casing and Green LED)
•
RemoteApp™ software suite & Operating Manual – delivered on a USB flash drive
•
System parts and accessories that meet manufacturer's specification MUST only be used. DO NOT replace the IEC Mains
Lead with alternative inadequately rated leads.
|
PAGE
7