Screen Settings - Panasonic TC AS660 Series Ehelp

Screen settings

MENU Menu
Screen format
SD signal:
Full → JUST → 4:3 → ZOOM
HD signal:
Full → JUST → 4:3 → ZOOM → H-FILL → SIDECUT JUST →
SIDECUT ZOOM
Changes the format (aspect ratio). Lets you choose the aspect depending on
the format of received signal.
Gray-out in 3D mode.
●
Overscan
(On/Off)
Selects the screen area displaying the image for FULL aspect.
On:
Enlarges the image to hide the edge of the image.
Off:
Displays the image in the original size.
Set to On if noise is generated on the edge of the screen.
H size
(Size 1/Size 2)
Adjusts the horizontal display range to reduce noise of both side edges of an
image.
Size 2:
Adjusts the image size according to the aspect mode to reduce noise.
Aspect mode: 4:3
●
– The width will be decreased on both sides to reduce noise.
Aspect mode: FULL / JUST / SIDECUT JUST / (H-FILL / ZOOM /
●
SIDECUT ZOOM)
– The width will be increased on both sides to reduce noise.
Gray-out in 3D mode.
●
> Picture > Screen settings
- 126 -