Table of Contents
Advertisement
5.
Select
to call all intended parties at the same time
The conference is set up after the intended parties answer the call
Note: The value under the icon
example,
indicates you can add up to 4 parties and you have added 1 party.
Tip: To remove/delete any of Added members (before dialing), just tap on the avatar of that member. It will remove it from
the list.
Initiating a conference by inviting participants
You can invite one or multiple members at a time to join the conference.
Procedure
1.
Place a call to the first party
2.
After the first party answers the call, select Invite
3.
Do one of the following:
•
Enter the number of the second party, and select Invite. Repeat the step above until you add all intended parties
•
Select
select the desired contact to dial out
•
Select
select the desired history record to dial out
•
Select Call multiple members? Click here >>
–
Enter the number or select the contact, and then select Add Members to add multiple members
–
Tap
to call all intended parties at the same time
Merging multiple calls into a conference call
During the multiple calls, you can merge them into a conference call.
Procedure
1.
Tap
Merge calls
The calls are merged into a conference call
Holding/resuming a conference call
When you place a conference call on hold, both other participants are placed on hold. Other participants cannot hear each other until you
resume the held conference call.
Procedure
1.
Select Hold to place the conference call on hold
2.
Select Resume to resume the held conference call
Muting/unmuting a conference call
You can mute the local microphone during a conference call so that the other participants can hear each other except you.
Procedure
1.
Select Mute to mute the conference call
indicates the number of parties you have added and the maximum number of the parties you can add. For
User guide
27
Advertisement
Table of Contents
