Medema A/S
User guide 2433-2019-B
Angle in/out
Loosen the two sucket set screw so they are not visible in the
"window".
Window
Adjust angle, and tighten the screw and the two sucket set
screws again.
Angle up/down (second joint)
Loosen the two nuts, and by
screwing the screw in or out the
angle changes.
By using the Angle up/down in
both first and sencond joints in
combination, you can raise or
lower the armrest.
And loosen this screw too.
Pin screw
74 of 92
Version 2.0.1/2022