Table of Contents
Advertisement
Medema A/S
User guide 2433-2019-B
Adjusting calf pads up/
down and the angle by
loosening these two
screws. Tighten again
after adjusting.
Press this release handle
and swing the leg rest to
the side.
In this position, the leg
support can be lifted off.
Note!
There are no wires to
remove.
The height can be adjust-
ed manually by loosening
these screws, adjusting
and retightening.
Note! The footrest MUST
be mounted with 2 screws.
Do not adjust it so far out
or in that only a single
screw is used for fasten-
ing.
67 of 92
Version 2.0.1/2022
Advertisement
Table of Contents
