medemagroup MC 1144 Adult User Manual page 39

Medema A/S
User guide 2433-2019-B
Description of how the Dahl Docking system Mk ll. functions
1. Dahl Docking station
2. Lock plate and spacer
3. Lock pin
4. Red LED
5. Green LED
6. Control panel
7. Release button
8. Manual emergency release lever
9. manual operating lever
Securing the wheelchair in the docking station
1. Maneuver the wheelchair slowly and in a uniform direction over the
docking station. The lock plate under the wheelchair helps to guide the
wheelchair into place in the docking station. When the lock plate is fully
engaged in the docking station, a spring-action locking pin automatically
secures the lock plate.
2. The docking station is equipped with a control switch that indicates
whether the lock plate is correctly secured in the docking station. As
soon as the lock plate comes into contact with the locking pin, a warning
tone will sound (a high-pitched howl), and the red diode/lamp (LED) in
the control panel will light up until the lock plate is either fully engaged or
else the wheelchair is removed from the docking station.
3. As an indication that the wheelchair is properly secured, the warning
tone will cease, the red lamp (LED) in the control panel will go out and
the green lamp (LED) will light up.
4. Do not forget to buckle up for driving.
39 of 92 Version 2.0.1/2022