Table of Contents
Advertisement
Medema A/S
User guide 2433-2019-B
Adjust the footplate side-
ways:
First the footrest must be
moved forward. See how to
under the point "To disman-
tle".
Then loosen four screws on
the back of the top beam.
Adjust and tighten again.
Push the footrest into place
and tighten the screws.
Calf pads - Angle
You set how tight the leg
pad should be to tilt, by
loosening or tightening
this pin screw.
Calf pads - up/down
Loosen the screw pointed
out in the picture beside.
Adjust and tighten again.
Travel: 210 mm from top
position to lowest position.
59 of 92
Version 2.0.1/2022
Advertisement
Table of Contents
