medemagroup MC 1144 Adult User Manual page 43

Medema A/S
User guide 2433-2019-B
Lock plate
Distance plate
Be aware to point the locking plate
in the right direction.
Secure screws with Locktite 222 onto treads on all screws.
Screws must be engaged with 9 mm. Tighten to a torque of 16-
18 Nm
Mount the batteries, the hoist and tilt module, the seat and
legrests again. Check that all functions are working okay.
To release the chair, use the electric release button that is in-
stalled in the car in the operating area. If the car is turned off, or if
it just needs power, there will be a manual release lever as well.
WARNING!
Do not use any other screws than those supplied from Dahl
Engineering (part #502800 which is quality 14.9, torx key size
27). Standard countersunk M8 screws will not be strong enough
in the event of a collision.
The lock plate should point forward.
The docking station are
mounted in the car bot-
tom. It must be carried
out by an authorized
workshop.
Move the chair over the
docking station, and it
will grab the lock plate. A
click sound mean it is in
place and secured.
43 of 92 Version 2.0.1/2022