Track; Figure 2-23 Track Information - Raytheon Anschütz Synapsis Conning NX Operator's Manual

Pos. No.
8
2.4.5

Track

If the track control system does not deliver track information the track information window
is empty.
2
3
4
5
6
7
Figure 2-23
Pos. No.
1
2
3
4
5
___________________________________________________________________________________________________________________
10000001045
ETA DEST
Displays the estimated UTC time of arrival at the selected destination,
based on either actual current or planned data.
Track Information
Stop Calc [X]
Function is active when the Track Control system is disturbed. In this
case, Conning calculates the Voyage Plan Data as Fall-Back information
until the course change of the To waypoint is completed. With pressing
this button, the Fall-Back calculation of Voyage Plan Data will be stopped.
The Voyage Plan Data fades out on all Conning instances in the system
To Waypoint
Displays the position from the next waypoint of the route. Number of next
waypoint is shown under To Waypoint.
Distance
Displays the distance to the next waypoint in NM.
Radius
Displays the radius in NM changing to the next track.
Bearing
Displays the true bearing to the next waypoints in degree.
25
Designation
1
Designation
Synapsis Conning NX
Operation
.
Edition: 002