1.
Select Menu from the top right corner of the display.
2.
Select Login.
Figure 2-15
3.
Select desired mode.
4.
Enter the password.
5.
Confirm selection with OK.
2.3
MFC Task Switch
The MFC Task Switch is placed at the top right corner of the display.
If not used the MFC Task Switch shrinks to a little icon. If selected, the MFC Task Switch
expands to a pull down menu providing a set of application buttons. The application
buttons are equipped with Task identifiers; these Task buttons allow direct access to
special ECDIS and radar functions and Conning NX pages.
Figure 2-16
___________________________________________________________________________________________________________________
10000001045
→ The Menu submenu opens.
→ The Login window opens.
Login Window
MFC Task Switch
19
Synapsis Conning NX
Operation
Edition: 002