Sharp PC-GP10 Series Operation Manual page 71

modem cable to the telephone line.
Modem
Jack
Be sure not to connect to the LAN jack (with
modem jack. It may damage both the modem cable and the LAN jack.
3. Turn on the computer.
Connect the modem to the telephone line directly. Do not use a
distributor or allotter.
5
Configuring the Modem
You may have already configured your modem during Windows XP Setup process.
Otherwise, make the necessary adjustments as shown below.
Modem Configuration
When you use the modem first time, you must type your location's information.
1. Click start - Control Panel.
2. Click Printers and Other Hardware; then, Phone and Modem Options. If
Classic view is selected, double-click Phone and Modem Options icon. .
3. In Location Information dialog box, select your country, type your area code,
etc., and select your dial type; then, click OK.
Next time you click or double-click Phone and Modem Options, Phone and
Modem Options dialog box appears. You can find the information you set in the
above steps in My Location of Dialing Rules tab.
You can change the settings or make a new location by clicking New...or Edit ....
5-2
Modem Cable
Core
To Telephone
mark) next to the