Sharp PC-GP10 Series Operation Manual page 28

have to exert much pressure on the pad. The glide pad will respond to a light touch
from your fingertip.
Click, Double-click, and Right-click
To click or double-click, you can use the left button just like that of a mouse.
Instead of clicking the left button, you can also just tap gently anywhere on the
rectangular pad. For right-clicking, you must use the right button.
Drag and Drop
You can move icons or windows by using "drag and drop" below:
1. Position the pointer over the object.
2. Press the left button; do not release it.
3. Holding down the button, move the pointer. The object moves together with
the pointer.
4. Release the button when the object reaches its destination.
Or you can tap the pad twice instead of pressing the left button in step 2.
Scroll
You can scroll through information in a list or in a document by using the glide
pad. To view information vertically, place your finger on the most right part of the
glide pad and slide your finger up and down. To view horizontally, place your
finger on the bottom part of the glide pad and slide your finger left or right. This
procedure works only in limited applications.
Changing the Configuration
In the Mouse Properties dialog box, you can change the configuration of the glide
pad, such as swapping left and right buttons, changing the pointer size, etc. Click
start – Control Panel; then, click Printers and Other Hardware; then, Mouse. If
Classic view is selected, double-click Mouse icon.
2
2-5