Table of Contents
Advertisement
2.
Turn on the computer.
3.
When the message <F2> to enter System Configuration Utility appears,
press F2 to open the Setup Utility.
4.
Disconnect the AC adapter, and leave the computer on until the battery is
completely discharged and the system shuts down automatically.
5.
Connect the computer to AC power and let the battery fully charge again.
6.
Turn on the computer and follow the steps 3 to 5 again.
7.
Restart the computer. The conditioning process is complete.
Do not connect the computer to wall outlet while discharging the
battery. The conditioning will be cancelled.
3
Changing the Battery Pack
The capacity of a battery pack gradually decreases when used repeatedly (the
deterioration rate depends on the operating environment). If the battery life
becomes extremely short even after the conditioning, you should buy a new battery
pack. Ask your local dealer for a new battery pack.
When you replace the battery pack with a new one:
1.
Turn off the computer and disconnect the AC adapter from the computer.
2.
Close the display cover and turn over the computer on a flat place.
3.
Slide the battery lock lever to the unlocked position ( ).
Battery Lock Lever
3-4
Advertisement
Table of Contents
