Wolf FWL-PushPull-30 Installation Instructions Manual page 47

9 Commissioning
Bol Factory settings
d
LED flashes quickly
LEDs
7100904 | 202202
Parameters
Power units (LTs) or room air
controls (FWL-PushPull)
230 VAC input
FWL-PushPull-30 (TwinUnit)
LED flashes slowly
Set value / Setting /
ventilation description
level
0 Operation without further LTs/
1 RLS
2 Operation with 1 LT or RLS
3 Operation with 2 LTs or RLS
4 Operation with 3 LTs or RLS
5 Slave no. 1
6 Slave no. 2
Slave no. 3
Adjuster for adding further room
air controls (RLS) or power units
(LTs) to this room air control. Ex-
ample: Two further RLS (RLS #2
and #3) are connected to RLS #1.
Set value = 2. Set value 4 on
RLS #2 and set value 5 on
RLS #3.
Notice: Only single-type RLS
combinations are permitted!
1 Sleep mode Intermittent ventila-
2 tion
3 Safety shutdown
4 Supply air operation without over-
5 run
6 Supply air mode with overrun time
of 6 min.
Supply air mode with overrun time
of 15 min.
For setting an additional function.
This can be activated with a button
or switch at the 230 V input.
WOLF GmbH | 47