Wolf FWL-PushPull-30 Installation Instructions Manual page 45

9 Commissioning
Bol Factory settings
d
LED flashes quickly
LEDs
7100904 | 202202
Parameters
ModBus settings
ModBus address
FWL-PushPull-30 (TwinUnit)
LED flashes slowly
Set value / Setting / description
ventilation
level
1 RS-485 inactive ModBus active
2 9600 baud
3 ModBus active 19200 Baud
This adjuster activates the Mod-
Bus and sets the baud rate. No-
tice: When the Modbus interface
is active, external sensors/LTs/
RLS cannot be connected.
1 Address 10
2 Address 11
3 Address 12
4 Address 13
5 Address 14
6 Address 15
7 Address 16
This adjuster selects the ModBus
address.
WOLF GmbH | 45