Silvercrest SBKG 40 A1 Operating Instructions Manual page 16

♦ To terminate the Bluetooth
Bluetooth
down the Bluetooth
6
the LED
mode again.
♦ Alternatively, switch the headphones off as described above to deacti-
vate the Bluetooth
NOTE
► The next time you turn on the headphones, they will automatically
connect to the last Bluetooth
ed. If your Bluetooth
reconnect to the headphones, you will have to re-establish the connec-
tion manually. A detailed description of how to do this can be found
in the operating manual for your Bluetooth
► If no Bluetooth
mode ends and the headphones switch off automatically.
► If there is an existing Bluetooth
within 10 minutes, the headphones switch off automatically.
► Ensure that the headphones are no more than 10 metres away from
the Bluetooth
ers or electronic devices placed between them.
As soon as you connect the AUX IN socket
►
the Bluetooth
to AUX IN mode . The Bluetooth
once you remove the audio cable
SBKG 40 A1
function on the Bluetooth
®
pairing button
®
flashes blue and white. The headphones are now in pairing
function.
®
playback device does not automatically
®
connection can be made within 10 minutes, pairing
®
playback device. Make sure that there are no barri-
®
function is deactivated and the headphones change
®
connection, either disable the
®
playback device or hold
®
8
for about 2 seconds until
playback device that was connect-
®
connection but no music playback
®
0
function can only be reactivated
®
w
from the AUX IN socket
playback device.
®
to the audio cable
GB │ IE │
w
,
0
.
13 ■