Kucht KUCHTNAPOLI Installation Manual And User's Manual page 21

LP GAS CYLINDER (TANK) RUBBER SEAL INSPECTION:
Inspect the propane tank valve rubber seal for cracks, wear or deteriora�on prior to use. A damaged rubber seal can
cause a gas leak, possibly resul�ng in an explosion, fire or severe bodily harm.
Inspec on should be done each me the propane tank is connected to the grill, has been exchanged or has
not been used for more than 60 days.
Do not use a propane tank with a damaged rubber seal. Exchange the tank or have the rubber seal replaced at a
qualified propane filling sta�on.
HOSE & REGULATOR SPECIFICATIONS AND INSTALLATION:
DO NOT a�empt to connect pizza oven, as purchased for LP(propane) gas, to any other fuel supply source such as a natural gas line.
DO NOT use any other pressure regulator/hose assembly other than the one supplied with your grill. Replacement pressure
regulator/hose assembly must be obtained by contac�ng customer service at
DO NOT a�empt to adjust or repair a regulator. The regulator is designed to operate at a maximum output pressure of 11 inches of
water
column (2.74kPa).
Ensure the tank valve is CLOSED prior to connec�ng the LP gas cylinder to your pizza oven.Turn the valve knob clockwise to properly
close the valve. Read and follow all instruc�ons and warnings on the supply hose safety tags. Read and follow all warnings in this manual
concerning the safe use of LP gas cylinders and the hose and regulator before connec�ng cylinder to pizza oven.
HOSE & REGULATOR:
Your pizza oven is equipped with a Type 1 connec�on device with the following features:
1. The system will not allow gas flow from the cylinder un�l a posi�ve connec�on to the valve has been made.
Note: The cylinder valve and all pizza oven burner knobs must be turned OFF before any connec�on is made or removed.
2. A regulator flow limi�ng device, when ac�vated, restricts the flow of gas to 10 cubic feet per hour. If the flow limi�ng device is
ac�vated, perform Regulator Rese�ng Procedure.
Note: If your pizza oven will not get hot enough to cook, the flow limi�ng
device may have been ac�vated.
CONNECTING HOSE & REGULATOR:
1. Inspect the propane tank valve rubber seal for cracks, wear or deteriora�on prior to use. A
damaged rubber seal can cause a gas leak, possibly resul�ng in an explosion, fire or severe
bodily harm. Do not use a propane tank with a damaged rubber seal.
2. A�ach or detach regulator to the LP gas cylinder only when cylinder is at rest in tank holder.
3. Check that the cylinder valve is closed by turning the knob clockwise.
4. Check that the pizza oven's burner control knobs are in the OFF posi�ons.
5. Visually inspect the hose assembly prior to each use for evidence of damage, excess wear, or deteriora�on. If found, replace the assembly before
using your pizza oven. Only the manufacturer's supplied replacement should be used.
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
WARNING
866-685-8248
21