Conferencing - NEC GT210 User Manual

Auto-Attended Transfer.

1. Set "Auto-Attended Transfer" to "Yes" under Web GUISettingsCall Features. And then
click "Save and Apply" on the bottom of the page.
2. Establish one call first.
3. During the call, press TRANSFER key. A new line will be brought up and the first call will be
automatically placed on hold.
4. Dial the number and press SEND key or # to make a second call. (Once the number is
entered, a "Transfer" soft key will show. If "Transfer" soft key is pressed instead of SEND
key or #, a blind transfer will be performed).
5. Press TRANSFER key again. The call will be transferred;
Cancel Auto-Attended Transfer.

1. For Auto-Attended Transfer, after connecting to the second party, a "Split" soft key will
show. To cancel transfer, press "Split" and "EndCall" softkey.
2. Press LINE key on hold, will resume first call talking.
Notes:
 To transfer calls across SIP domains, SIP service providers must support transfer across SIP
domains.
The SV9300 cannot Cancel Auto-Attended Transfer because "Split" softkey is not

available.

Conferencing

GT210 can host up to a 3-way conference call.
Initiate a conference call.

1. Establish calls with 2 parties respectively.
2. While 1 call is active, the other call/calls will be put on hold with its LINE key blinking in green.
3. Press CONFERENCE key.
4. Press the desired LINE key on hold, the conference will be established.
Cancel Conference.

1. If after pressing the CONFERENCE key, the user decides not to conference, press Cancel
soft key or the current active LINE key (LED in solid green);
2. This will resume the 2-way conversation with the current line.
 Hold and Re-conference.
[SV9500/SV9100/SL2100/SL1000/SL1100]
1. During the conference, press HOLD key.
21
FW version 1.0.4.152