Vcd Record Button; Play Button - Hauppauge WinTV-PVR-150 Installation And Reference Manual

WinTV-PVR Installation and Reference Manual
The quality of the video recording and the directory where the files are
stored are set in the MPEG Configuration Menu (see the section enti-
tled "Configuring the format for MPEG compression"). Click the PREF
button on the WinTV2000 application, then clicking Capture / MPEG.
There are several video qualities: VCD plus MPEG-2 2.0, 12.0
MBit/sec, DVD and SVCD. The highest quality is MPEG-2 12.0
MBit/sec, and the lowest quality is VCD.
While recording:
- Live video continues to play in the WinTV window
- the Counter will display the length of your recording
- if you had started recording with the OTR button, and had clicked it
more than once, the total time for the recording will also be dis-
played.
The recorded video file is saved in the DVCR Recorded File Path which
can be configured from the MPEG Configuration Menu. Everytime you
record a file, a new file is automatically created. The first file will be
_dvcr001.mpg. The second file will be _dvcr002.mpg and so on.
Click the Stop button to stop your recording. The recorded
audio/video file is then saved to disk using the automatically assigned
file name. The Time counter is reset to 00:00:00 after the recording is
saved.

VCD Record Button:

Clicking the VCD Record button will automatically generate a file name
and start recording your program using the VCD record quality. All
other characteristics are the same as in the Record mode. This button
makes it easy to save VCD quality video, for burning later on to a Video
CD.

Play Button:

Clicking the Play button will playback from disk the last video file creat-
ed. When playing a video, you can rewind, fast forward, replay 10 sec
or skip forward 10 sec using the buttons on the control bar.
5-2