Hauppauge wintv-usb tv tuners: reference guide (64 pages)
Summary of Contents for Hauppauge WinTV-PVR-150 Kit
Page 1
London, U.K. SE1 9QQ Included with the WinTV-PVR-150/500 MCE Kits: • WinTV-PVR-150 MCE PCI board, with 125 channel cable ready TV tuner, MPEG-2 hardware audio/video compressor. The WinTV-PVR-500 MCE PCI board comes with dual 125 channel cable ready TV tuners and dual hardware MPEG encoders plus one FM radio receiver.
If your A/V device uses S-Video, connect to the S-Video input on the WinTV-PVR-150/500MCE. If your video device uses composite video instead of S-Video, use the yellow RCA jack. Audio input from an external A/V device can be brought into the WinTV-PVR-150 WinTV-PVR-150 WinTV-PVR-500...
Page 3
/500MCE via the white and red audio input jacks. Step 2: Installing the WinTV-PVR-150/500 Media Center driver After installing the WinTV-PVR in your PC, boot Windows. The Found New Hardware Wizard will appear. Insert the WinTV-PVR MCE Driver Installation CD-ROM in your PC’s CD-ROM drive.
After determining the type of signal, Media Center displays a message You are Done! Now, you need to set up the Electronic Program Guide. You will see a message: Set Up Your Program Guide. Click Next. The Program Guide Set Up Wizard will move you through the completion of the Program Guide set up.