Watch, Pause And Record Tv Buttons - Hauppauge WinTV-PVR-150 Installation And Reference Manual

WinTV-PVR Installation and Reference Manual
- Place the IR Receiver on your desktop so that the infrared light from
the IR Remote transmitter can reach the IR Receiver.
- Turn on your computer.
- If you have previously installed the WinTV applications, the IR soft-
ware should automatically run, and you will see the WinTV Remote
icon in the Device Tray.
Some remote control buttons
0 - 9 buttons: When playing back a recording, the "1" button will skip to
10%, the "2" button 20%, etc. of the length of the recording.
Skip ahead button: holding the skip ahead button advances the video
about 5 minues per 10 seconds the button is depressed.
Skip back button: pressing and holding the Skip back button makes
the video go back about 5 minutes for every 10 seconds the button is
depressed.
Go button: brings up the WinTV task list. Allows you to start
WinTV2000, WinTV32 or WinTV-radio.
Menu button: brings up the Windows Task list. Use the left and right
arrows to change to other Widnows tasks.
Green power button: will close the WinTV application.
Checking the function of WinTV's IR Remote
WinTV's Remote application, IR.EXE, is loaded every time Windows is
booted. You will see a Remote icon in the device tray. To check the
remote control operation, point the Remote transmitter at the Remote
control receiver. When you click the TV button on the Remote transmit-
ter, after 3-4 seconds the Remote icon should flash, indicating that the
Remote application is running. After the Remote icon flashes, the WinTV
application will be run.

Watch, Pause and Record TV buttons

There are three buttons to control the Watching, Recording and
Pausing of TV. Clicking on the Pause button will cause the Pause
menu to roll down from the WinTV2000 application, while clicking on
the Rec button will cause the Record menu to roll down.
The One Touch Pause button prepares the WinTV-PVR for pausing live
3-4