Setting Up An External Source - Hauppauge WinTV-PVR-150 Installation And Reference Manual

WinTV-PVR Installation and Reference Manual
One Touch
One Touch
Record
Pause
Record mode
TV Mode
Pause mode button
button
button
video (see Pause mode below).
The One Touch Record button will start a record session. If you click
OTR more than once, a record timer will be set and the recording will be
done for 15 minutes for each additional time the OTR button is clicked.
For example, if you click the OTR button 3 times, the WinTV-PVR will
record for 30 minutes.
Setting up an External video source
Click the Suite button (Channel configuration) on the WinTV2000 and
click on Add. Click Composite (or S-Video). Pick your video format
(NTSC for North and South America, PAL for Europe, etc.) and give it
a name (for example: external) and description, then click ADD. Now
you have a external video channel. Note: if setting up S-Video, make
sure to check the S-Video box.
To change to External video, either select the channel name you just
configured, or click the Switch video source button on the WinTV2000
application.
3-5