Operating Multiple Uni-Links In The Same Area (Menu 2) - VETEC UNI-LINK01 User Instructions

Deactivate peak hold
*Peak hold will not deactivate when the Uni-Link is turned off.

5.2 Operating multiple Uni-Links in the same area (menu 2)

Menu 2 is used when operating multiple Uni-Links with wireless displays in the same area. To avoid
interference each set of Uni-Link and wireless display can be set to operate on its own channel. In
menu 2 it is possible to choose between 99 different channels.
Activate menu 2 on the Uni-Link
Selecting a channel on the Uni-Link
*Repeat the above on another Uni-Link and select a different channel.
Activate menu 2 on the handheld display
Press and hold MENU until the display shows 1.
Select 1 by pressing ENTER.
The display now shows
Press until the display shows ∙PEoFF.
Press ENTER to turn off Peak Hold.
Press RETURN to go to default settings.
Press the ON/OFF button.
Press and hold MENU until the display shows 1.
Press to go to
Select 2 by pressing ENTER.
The display shows the default channel.
The first digit is blinking which means that it can be
changed using the arrows.
Choose between 99 frequencies.
Select a channel by pressing ENTER.
Press RETURN to go back to weighing.
Press the ON/OFF button.
Press and hold MENU until the display shows 1.
Press to go to
Select 2 by pressing ENTER.
- 6 -
PE on.
2 (Menu 2).
2 (Menu 2).