Important Information; Video Guides - VETEC UNI-LINK01 User Instructions

1. Thank you for purchasing a Uni-Link
The Uni-Link from Vetec A/S is designed with the purpose to increase efficiency and accuracy in all
situations.
The development has been focused on optimizing features that make it easy for the operator to
handle and operate the Uni-Link and still achieve stable and accurate measurements. The increa-
sed ease of use is achieved, for example, by a flat design, simple menu structure, quick guide and
fast charging with standard USB charger.
Uni-Link is designed and manufactured in Denmark for high quality assurance and the service
department provides professional support, repair and calibration service.

1.1 Important information

READ ALL INSTRUCTIONS AND WARNINGS CAREFULLY BEFORE INSTALLATION AND USE.
These instructions have been published by Vetec A/S and are not subject to any guarantee.
The instructions may be withdrawn or revised by Vetec A/S at any time and without further
notice. Corrections and additions will be added to the latest version of the instructions.
Carefully read through the safety instructions in this user manual and follow the installation
and operating procedures and requirements. Failure to follow these warnings could result in
serious injury and property damage.
Every use should be carried out according to current regulations in the country of use. Vetec
A/S is not responsible for local regulations not being followed.
1.2 YouTube video tutorials
Vetec A/S
Teknikvej 69
DK-5260 Odense S
Tlf.: +45 65919802
post@vetec.dk
www.vetec.dk
Visit Vetec's YouTube channel to watch tutorials
demonstrating the installation, daily use and menu
setup.
- 1 -