Menu / Advanced Settings; Peak Hold (Menu 1) - VETEC UNI-LINK01 User Instructions

5. Menu / Advanced settings

5.1. Peak hold (Menu 1)

Activate peak hold
*Peak Hold is as default off.
Repeat lift
Press the ON/OFF button.
Press and hold MENU until the display shows 1.
Select 1 (Menu 1) by pressing ENTER.
The display now shows
Press to go to
Press ENTER to activate Peak hold.
The display now shows 1.
Press RETURN to see the untared measurement.
Press RETURN to return to measurement.
When peak hold is activated, the second button
lights up red.
Lift a load and the display will "freeze" at the
highest measurement recorded.
Press and hold →0← until the display shows 0.
Lift a load.
The display will "freeze" at the highest measure-
ment recorded.
Repeat the above if needed.
- 5 -
PEoFF (Peak hold off).
PE on (Peak hold on).