Advertisement
remove the power line, please note the operation order
above.
【Power Supply Connection】
External 5VDC power supply
Model I provides external 5VDC power supply, DC
round head.
Built-in 220VAC power supply
Model II provides built-in 220VAC power supply,
and AC outlet with switch.
Power supply range: 85~265VAC.
Built-in 48VDC power supply
Model III provides 3-pin 5.08mm pitch
terminal blocks and built-in 48VDC power
supply.
【Checking LED Indicator】
The device provides LED indicators to monitor its operating
status, which has simplified the overall troubleshooting
process. The function of each LED is described in the table as
below:
LED
Status
Description
PWR is connected and running
ON
normally
PWR
PWR is disconnected and running
OFF
abnormally
Copper port has established valid
ON
connection
Copper port is in an active
Link/Act
Blinking
（TX）
network status
Copper port hasn't established
OFF
valid connection
Fiber port has established valid
ON
connection
Link/Act
Fiber port is in an active network
(FX)
Blinking
status
Fiber port hasn't established valid
OFF
connection
Copper port rate is 100Mbps
ON
Copper port rate is 10Mbps or it is
100(TX)
OFF
not connected
Fiber port rate is 100Mbps
ON
100(FX)
Fiber port is not connected
OFF
ON
Copper port is in full duplex mode
FDX
Copper port is in half duplex mode
OFF
【Specification】
Panel
100M copper port
10Base-T/100Base-TX
self-adaption
100M fiber port
100Base-FX fiber port
Indicator
Power supply indicator, fiber
port
rate
copper
indicator, fiber port connection
status indicator, copper port
connection
copper port duplex indicator
Power supply
Model I
External 5VDC power supply,
DC round head
Model II
Built-in 220VAC (85~265VAC)
power supply, AC outlet with
switch
Model III
Built-in 48VDC power supply,
3-pin 5.08mm pitch terminal
blocks
Operating
environment
Operating temperature
-10~60℃
Storage temperature
-20~70℃
Operating humidity
5%~95% (no condensation)
Protection grade
IP30
status
indicator,
port
rate
status
status
indicator,
Advertisement
