JVC HM-DH40000K Service Manual page 28

3.2.17 Take-up lever, take-up head and control plate
3.2.17.1 How to remove
(1) Remove the spring of the take-up lever from the main deck.
(2) Remove the lug (A) of the take-up lever from the main deck
and pull out the take-up lever and the take-up head togeth-
er.
(3) Remove the screw (A).
(4) Align the idler arm assembly pin in the center (centre) of the
R section of the control plate guide, remove the control
plate guide lugs (B) and (C) from the main deck, and re-
move the control plate guide.
Idler arm assembly pin
Screw(A)
Fig.3-2-17a
3.2.18 Capstan brake assembly
3.2.18.1 How to remove
(1) Move the lug (A) of the capstan brake assembly in the ar-
row-indicated direction so that it comes into alignment with
the notch of the main deck. (See Fig. 3-2-18a.)
(2) Remove the lug (B) of the capstan brake assembly from the
main deck and remove the capstan brake assembly.
Capstan brake assembly
Fig.3-2-18a
3.2.19 Sub brake assembly (take-up side)
3.2.19.1 How to remove
(1) Remove the spring attached to the lid guide and sub brake
assembly (take-up side).
(2) Bring the lug (A) of the sub brake assembly (take-up side)
into alignment with the notch of the main deck.
(3) Remove the lugs (B) and (C) of the sub brake assembly
(take-up side) from the main deck and remove the sub
brake assembly (take-up side).
1-26 (No.82933)
Take-up lever
Lug(C)
Take-up head
Lug(A)
Lug(B)
Control plate guide
Lug(B)
Lug(A)
Lug(A)
Lug(B)
Fig.3-2-19a
3.2.20 Main brake assembly (take-up side), reel disk (take-
up side) and main brake assembly (supply side)
3.2.20.1 How to remove
(1) Move the main brake assembly (take-up side) in the arrow-
indicated direction and remove the reel disk (take-up side).
(2) Remove the spring attached to the main brake assembly.
(3) Remove the lug (A) of the main brake assembly (take-up
side) and pull out the lug (B) after bringing it into alignment
with the main deck notch.
(4) Remove the lugs (C), (D) and (E) of the main brake assem-
bly (supply side) from the main deck and pull them off. (See
Fig.3-2-20a.)
Main brake assembly
(supply side)
Lug(C) Lug(E)
Lug(D)
Fig.3-2-20a
Spring
Sub brake
assembly
(take-up side)
Lug(C)
Main brake assembly
Reel disk
(take-up side)
(take-up side)
Lug(B)
Notch
Spring
Lug(A)