Accessory Storage; Smart Watch Stand; Cable Organizer - La Crosse Technology CA74962 Setup Manual

CHARGING
Earbud Charging
1. Remove the Dock Cover from the top of the
station.
2. Open the bottom Accessory Compartment
and find the Earbud Dock and Cable Fittings.
3. Feed your earbud charging cable (not
included) up through the Earbud Dock,
securing it with the correct Thick or Thin
size Cable Fitting.
4. Wrap any extra cord up inside the Accessory
Compartment and feed the charging end
through the bottom hole.
5. Plug the cord into the appropriate 1 amp
USB Charging Port.

Accessory Storage

The Earbud Dock, Cable Fittings, and Smart Watch Stand can all be stored in the
Accessory Compartment on the bottom of the station when not in use.
CHARGING

Smart Watch Stand

The removable Smart Watch Stand is engineered to fit
a variety of smart watch brands. Its open design allows
for easy access to your device's unique charging port
location, for use with the included USB Charging Port.
How to attach the Smart Watch Stand
1. Remove the Smart Watch Stand from the Accessory
Compartment on the bottom of the weather station.
2. Insert the watch stand into the left side of the unit.
3. Place your watch on the stand and attach its
charging cord.
4. Plug the charging cord into the correct USB port.
Note: Smartwatch and charging cords not included.

Cable Organizer

Use the included Cable Organizer to keep
your charging cords neat and secure.
Insert the organizer into the Cable Clip
Keyhole and slide it down to lock in place.
Lift up and pull the Cable Organizer out to
remove it.
13
Open design fits most
smartwatches, including
Apple Watch
14